Laser engraving fume extractor for wood engraving
Product Description
Laser engraving fume extractor for wood engraving
Precautions for the use of deodorizing purifiers: 1: The industrial deodorizing purifier is designed to treat the exhaust gas (toxic, harmful and pungent smelling gas) generated during laser processing. It is not an air conditioner or air purifier used for indoor exchange, so it cannot As an indoor emission device, the optical decomposition conversion disperses the molecular structure of the exhaust gas and converts it into small molecule components instead of converting it into air for human breathing. The small molecule smells slightly-some disinfectant smell, so please discharge it outdoors (according to environmental protection Required emission standards), the pipe discharge port should be placed in a place with good air circulation, and the pipe discharge outlet can be almost odorless with a good circulation and diffusion of about 5 meters. 2: The channel configuration of the purifier is: more than 6 inches in diameter and more than 15 meters in length. When installing, please make sure to connect the pipes. If there are gaps in the pipe or at the interface, it will cause the odor to leak into the room and cannot be completely pumped into the purification. Machine for purification.
Kingsom fume purifying and filtering system is for cleaning of both particles and gases.It's designed to filter the harmful substances, such as hydrocarbon and cyanide, during the process of soldering, tin dipping in the solder pot, laser marking, and carving, printing, beauty salon etc.It catches harmful smoke with freestanding ducts and adjustable air volume to significantly improve your working environment. Our company can also develop customized purifiers according to the special requirements of customers, such as Lab Fume Extractor, Soldering Fume Extractor,Mobile Fume Extractor , Solder Paste Dispenser,High Quality Beauty Salon Air Filter，Portable Smoke Absorber etc.
Applications and Features of this Factory Directly DX-6000 Industrial Air Filter for Laser Soldering Industry
1, Multilayer filtration and rapid purification.
2, It can sabe 43% power compares with Other similar products.
3, Mainly for CO2 laser engraving, laser cutting, fiber laser marking, large soldering pot, argon arc welding, ten-station manual soldering.
4, One or two air inlet interface for selection.
| Model | DX6000 |
| Air inlet interface | Φ90mm *2 or Φ90mm*1 flange |
| Voltage | AC 110-220V |
| Power | 700W |
| Max. No-load Speed(r/min) | 2*6500 |
| Negative Pressure | 3000Pa |
| Speed/Load | 27m/s |
| Filtering effect | 0.3μm99.97% |
| Noise | <75dB |
| Flow | 620m³/h |
| Dimensions(L*W*H) | 550*415*1300mm |
| Weight | 75Kg |
Product Consumption (caculat according to 8 hours everyday)
1st Layer:
Primary fire prevention filter barrel: 185*325(mm)
Replacement period: 1-5 month
2nd - 3rd Layer:
PP Medium efficiency filter element: 450*380*100(mm)
Replacement period: 3-6 month
4th - 7th Layer:
Active carbon high efficiency filter element: 450*380*50(mm)
Replacement period: 3-6 month
Contact us if you need more details on Laser Smoke Welding Fume Filter. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Laser Marking Fume Extractor、Laser Engraving Fume Extractor. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Industrial Air Filter XL Seris